This page may have Commerce Content. If you buy something from our posts, we may get a small share of the sale. Click here for more.
Editor & Article Writer for Outdoor Wilds
As an Amazon Associate I earn from qualifying purchases. Thank you for helping to support the site.
How to Reduce GoPro Wind Noise - Record Clean Audio WIth These Solutions
GoPro cameras are great for action style video filmimg. Howver, the audio quality can suffer when outdoors. Wind noise is arguably the most common problem with audio recorded on a GoPro camera.
Fortunately, wind noise is an issue that is easy to deal with. There are a number of ways to capture clean audio even in strong blustery wind conditions
Discover how to record the best quality audio while outdoors on GoPro cameras including the Hero 8, 9 & 10 Black.
Use An External Microphone
Most GoPro camera models are compatible with an external mic. From GoPro HERO3 onwards, a port has been added that can be used to connect an external microphone.
Keep in mind that the HERO7 Silver/White and the HERO session are the only GoPro cameras released after the HERO3 that do not support an external microphone.
To plug an external mic into a GoPro you will need a microphone adapter. GoPro provide an adapter with a USB-C and 3.5mm port. Check your GoPro to see which type of USB port it has.
My suggestion is to go with the Rode Video Micro microphone if your serious about recording clean audio while vlogging. You will need an official GoPro 3.5mm mic adapter to plug the Rode mic into.
The Rode Video Micro comes with a shock mount, plus a Rycote windsock. Its possible to use the Rode with most cameras and smartphone with a 3.5mm port.
If you decide to go down the external mic route you will also need a cage or SmallRig to attach the external mic to using the cold shoe.
All this is going to add up to a fair investment. The next solution I have is a fraction of the cost and almost as effective at reducing wind noise especially on the later GoPro models such as the Hero 9 & 10 Black.
External Microphone WIth WInd Cover
Last update on 2024-12-08 / Affiliate links / Images from Amazon Product Advertising API
GoPro External Mic Adapter
Last update on 2024-12-08 / Affiliate links / Images from Amazon Product Advertising API
Small Rig With External Mic Cold Shoe
Last update on 2024-12-08 / Affiliate links / Images from Amazon Product Advertising API
Micro Windjammers - Low Cost Wind Noise Reduction Solution
Windshields are a very simple solution. They are a fur cover for the camera microphones that are applied by adhesive pads. They may look a little unorthodox, howver, they work and have been used by video professionals for many years.
The Micro Windjammer from Rycote reduces wind noise very well depending on the wind speed and direction.
Rycote provide a whole range of windjammers for practically every type of microphone and camera / microphone set up.
I personally use the Rycote Micro Windjammers (See Below) with my GoPro Hero 10 when skiing. You place the mini windjammer over the microphone holes on the camera by using the supplied sticky adhesive pads.
They reduce wind noise in all but the strongest of winds. It’s certainly worth considering buyng some as they last a long time. I’ve still got over half a pack left after a whole seasons skiing.
Last update on 2024-12-08 / Affiliate links / Images from Amazon Product Advertising API
Wind Noise Reduction Settings
If you are getting a GoPro windshield to reduce wind noise, you should also check how it performs with the wind noise reduction setting on.
Usually, it does a decent job at removing wind noise and when paired with a windshield, it should provide great results.
To activate this, there are different menus you have to go through depending on your GoPro Hero version.
HERO8, 9 & 10 Black, plus GoPro MAX: Go to the settings and check for wind noise reduction. Set it to Auto. Remember to turn on Protune.
HERO7 Black: There should be 3 settings. Make sure that Auto is selected out of Auto, Stereo, and Wind. Again, make sure you turn on Protune.
HERO5 Black: On this version, you will need to go to Video Mode, Advanced Settings, and enable Manual Audio Control. Once done, you will be able to turn on wind noise reduction.
Remove The Waterproof Enclosure
Another common problem is with waterproof enclosures. They are not entirely waterproof. If you are filming in extremely windy conditions, the small openings in the case will cause extreme wind noise.
The solution is to get rid of it completely. This may not work all the time. You should test this out to see if it works for you.
Protect The Camera From Wind
The cheapest and easiest way is to just change the orientation of the camera. Avoid having the camera completely exposed and out in the wind. If possible, try to find some sort of shelter to block some of the wind.
There are multiple ways to do it and it may be different for you depending on your filming conditions.
The bottom line is that you should be mindful when picking your filming spot and position before using the camera. Otherwise, you will get home and discover that you have recorded footage that may have unusable audio.
The Bottom Line
Circumstances are different and your setup may not allow you to use one method or another. Most professionals simply prefer to use an external mic with a windshield.
While this may cost a bit extra, it is the most convenient solution because once you have it on, you do not have to worry about wind noise.
A windjammer cover works well but not in extreme wind conditions. Depending on how you plan to use your camera, you may find one solution better than the other.
Want to know how to format an action camera SD card?
Read this guide on how to format an SD card for your action camera.
Popular Posts
